Fixture management Acceptance → Storage → Custody → Requisition → Return to the warehouse 4.1 Acceptance of fixtures     4.1.1 Check whether the fixture has a "Technical Parameter Table for Fixtures".     4.1.2 The fixt

2018-05-02

Manufacture of fixtures 2.1 Drill the bottom 4 cm pad of the un-drilled jig and the 4 cm pad with the upper hole drilled with 5-7 screw holes, especially 4 drilled at the four corners. Be careful not to drill into the hole t

2018-05-02

Fixture design Fixture designFixture design

2018-05-02

Test fixture design, manufacturing, management The test fixture is a special fixture designed for the electrical performance continuity test designed with the PCB board as a model.

2018-05-02